Comment

Comment by prakash joshi on January 8, 2012 at 3:18am

Hi all,

I am an irrigation designer from India. Please keep me in mind if you require a designer to outsource your projects. my mail id is prakash.joshi2106@gmail.com.

Thanks

Comment by Yucel Coban on March 6, 2011 at 3:08pm

Hi All!

I'd like to offer you an irrigation tube, which is to be digged under the plant/grass into soil (20 cm). Tube will 'sweaten' the water through porous surface and feed water to root system. Absolutely easy and water saving!!

Please feel free to contact me for support!

 

Yucel 

Comment by Doug Prouty on January 28, 2011 at 9:19pm

Has anyone designed a commercial or residential irriation system with HTPE pipe?

Comment by Ruthie Wanjiku on August 6, 2010 at 7:18am

Hi all,
I am currently working on a landscape design for a parking lot in an arid area. Which is the best irrigation sytem to use, taking note that the island is 2metres wide?Where can i get more information on irrigation design?

Comment by Jim Del Carpio on December 2, 2009 at 11:57am

Hi All,
A little Bio. for your consumption. I started irrigation design in 2001 in Arizona. Worked with a L. A. in Arizona, who exclusively went after IRRIG. projects. He did very well, However I wanted to grow to other areas and moved on. Jump to the present, In the last office I worked in (March 2009), My billable hours for Irrigation Design was nearly 50%, this was in Florida. Currently, I'm involved in other areas of the practice but expect to be back to Irrigation designing shortly.

thanks

Comment by Sara Fix on September 21, 2009 at 4:11pm

Hello fellow irrigation designers! I am taking the Certified Landscape irrigation Auditor Exam in the beginning of October and was wondering if anyone has the 2007 manual? Let me know if you would be willing to part with it! Thanks :)

Comment by Burcu Tiryaki Çallı on September 19, 2009 at 6:51am

Hi all.. I just joined the group..I use eaglecad for irrigation projects for 7years. It also runs in Autocad. You may test yourself by freeware version if you want...
Greeting from İstanbul...

Comment by jared jones on September 9, 2009 at 5:53am

Rob-

We use Land FX; which it sounds like the same setup as Raincad. It is extremely simple to pick up on and their support is like no other. We have been using it for almost 5 years now without one complaint. I would give them a call and talk to their rep if you are interested.

Comment by Bill Kisich on June 4, 2009 at 12:29pm

Does anyone here have experience with Leit solar controllers? Any issues with long wire runs, durability, etc?

Thanks in advance

Comment by Steve Hata on April 19, 2009 at 8:31am

Rob,

There are a lot of good softwares out there, selection really depends on your situation and needs. I would "demo' as many softwares as possible to see which one fits your office best.

For Autocad, Raincad for Autocad works well. It runs in Autocad as a toolbar, similar to Express Tools. You still have the full function of autocad while adding some very powerful tools for irrigation, symbols libraries, hydraulic calculation, sprinkler placement, pipe placement, databases, etc. Everything is saved as a .dwg so there are no issues opening files.

Can anyone recommend an irrigation efficiency software?

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Folio