Marija Perkovic

  • well, any suggestions would be appreciated… its still a concept now so lets make it great. i want some excitement…

  • Personally, I would rather see it opened up to other render engines as well, partially because I use a different one than 3DS now, and also because it would be a good way for people unfamiliar with the strengths of different programs to see what they can do.

  • bring it on 😛

  • start start start 😀

  • start the competition ;))

  • has anyone used ‘view’ seems like a really good program im about to start learning… any suggestions?

  • Pascu Andreea posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    That’s great. Thank you! I’ve got your book, but I couldn’t find that one in there, shame on me if it was there..too tired! Thanks again.

  • Pascu Andreea posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Yes that was it!!! it works. Too bad there is no list of all these shortcuts, that would help a LOT. Thank you so much.

  • John Pacyga posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Not a bad question to ask at all.  The easiest way is to select an item with the black arrow key [or hit spacebar]. Then click the Move tool which has arrows in all directions and can be found in the Large Tool Set or the Getting Started Toolbar [or hit M on the keyboard].  After the item is highlighted and you have the Move tool selected, hol…[Read more]

  • Pascu Andreea posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Hi. I know it might sound stupid, but I still couldn’t figure out how you drag a copy in SketchUp. I can’t find any Move/Copy tool. 🙁 Hope someone can help.
    Thanks.

  • Doug Prouty posted an update in the group Group logo of Irrigation DesignIrrigation Design 14 years ago

    Has anyone designed a commercial or residential irriation system with HTPE pipe?

  • please upload any work you may have done to the discussion forum entitled: “the gallery” there is some new stuff if you want to check it out… scroll to the bottom…

  • Brent, its been a year + since your comment and the same for me visiting the lounge, sorry for the delay! I am interested in hearing where you are in your career and what direction you chose to get there…

  • Eric Shepley posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Thanks for the help.

  • Patrick Webb posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Does the area obstructed show up in the image after capturing? I have had it look like it was clipped, and then after saving the view for the animation it worked.

  • Wyatt Thompson, PLA posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Eric, I’ll try and help but I need some more info. It might be that you’re experiencing a known “clipping” problem. That usually occurs when your model is located really far from the origin. Is that the case? Does the problem occur in all the time, or just in certain scenes? Could you repost the image from a different vantage point with the axis…[Read more]

  • Eric Shepley posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    I am having issues with an aerial view of a site I’m trying to create a fly through for.  When I position the camera, some of the area is obstructed like there is a plane in from of part of the view.  Any suggestions?

  • Andrew Spiering posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Hey John,
    Your blog looks great!  We’ve added it to our blog roll.  Keep up the good work…

  • Steve Mercer posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Believe me, if I could do it all in SketchUP Pro I would!  The problem is that for Construction Drawings and Deliverables and for importing Civil Data from Survey Instruments, SketchUP is not your best tool.  It lacks the 2d CAD capablilities of  a standard CAD package.  It is getting better though.  BricsCAD (or -let me hold my nose here- Auto…[Read more]

  • Steve Mercer posted an update in the group Group logo of SketchUpSketchUp 14 years ago

    Hi David and John!
     
    See my discussion “Land FX plug-in for Sketchup” When I was talking with Stephanie I included a typical work flow.
    Hope this helps!
    s.

  • Load More

Lost Password

Register