Landscape Architecture for Landscape Architects › Forums › DETAILS & MATERIALS › Designing a water runnel feature › Reply To: Designing a water runnel feature
We just did an almost totally flat “creek” feature, about 70 feet long with a similar effect, and we designed the flow for 1″ depth of continuous water to get the flowing /turbulant water effect you are talking about. And, you are correct about the obstacles helping make noise. We used river rounds 2-4″ diameter, flat across so the water “shallowed” and made a little noise.
Others have done the math so I will not go into it. Reputable pump manufacturers have engineers on staff who can give you what you need. If you give them your desired discharge rate (continuous flow needed at the top) , the running length & height from pump to discharge point, they can give you pump and pipe size recomendations. Remember to make clear that you need this performance at the discharge, and not at the pump–these will be two different values. Pump manufacturers also deal in different mesurements (gallons per hour–gph)
I tend to size my delivery systems 10-20% larger than what the calculations tell me, and I put a bleed-off valve near the pump on the discharge line, which can be manually adjusted to the flow required. Nothing is worse than having a pump installed that is a little too small–better to have more capacity, and be able to adjust it down if needed.
The most common mistake I have seen in this type of feature is not dealing with the “surge”–the amount of water it takes to “charge” or fill the system when turning it on, and dealing with this excess water when it is turned off. You will need to provide a water storage (tank,pond), and/or fresh water fill device to deal with this. This amount varies greatly based on slopes and design details.
You will also need to think about external pump vs. submersible– another discussion. I only use submersible pump (after years of misery with externals, and after the submersible got more reliable and efficient). Recomended submersible pump manufacturers: Tsurumi, Tidal Wave
