Burcu Tiryaki

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #168558
    Burcu Tiryaki
    Participant

    Thank you very very much for your help..Specially It’s so very useful to learn about locking the position Daniel..and also checked the component axe thing Wyatt. Thanks..
    So sorry but I still couldn’t get any solution:(
    And want to show you my problem from this animation. Pay attention to the plants in the entrance..At first scenes you can see them standing still..But when I move the camera they’re traveling all around..I certainly tried to put the plants to the face, to end point of the pot or to somewhere else.It works in google components yes..But the result hasn’t changed for the ones that I exploded and made new one…
    Guess It happened because of my way to make it..what I made is: I that red plant was green, I exploded it and changed the colour by using material/colour tool..Then I made new compenent..I wonder where am I wrong in that technic?What is the best way to explode a plant and change colour?

    #168561
    Burcu Tiryaki
    Participant

    Thanks for your help. Yes I’m working on a flat surface, and yes I can see the “on face” pop up..But now I remember I exploded the component and made new component and that flows. Did I had to give axes to it? But How..?

    #173130
    Burcu Tiryaki
    Participant

    About irrigation firstly you have to tell us about the angle of the roof. Is it flat or slopy?if its sloopy use parallel dripper lines through the ground. use a Q16cm small valve before each dripper line so you can controll the water..if water is much be sure that it falls..

    #173131
    Burcu Tiryaki
    Participant

    You can use ondugreen system at the roof. It also saves water in that egg thing and let you use that water by evaporation again..You may check it from http://www.onduline.com.tr/Urunler/sistem-ONDUGREEN.aspx (see acrobat reader)But it also gives different types of Sedum as an example you’ll see..
    I made a flat type roof garden and watered it with irrigarion pipes (with holes in every 40cm) with separated valve.So I could controll the water. After a short time plants covered the pipes so you don’t see them now.I used mesembryanthemum and verbena. They also work in roof gardens.

Viewing 4 posts - 1 through 4 (of 4 total)

Lost Password

Register