-
vc hefti posted an update in the group Project Resource Connection 13 years, 7 months ago
Also, any book suggestions for a general resource on phytoremediation?
-
vc hefti posted an update in the group Project Resource Connection 13 years, 7 months ago
Any good resources/case studies on winter water/ice features?
-
Michael Van Beek posted an update in the group 3ds max + landscape architecture 13 years, 7 months ago
coolio fox. i started a discussion about it on the main page… if you have any thoughts post em up, if you want to make it happen say something to that effect i want the discussion board to get the word out beyond the group.
-
Ryland Fox posted an update in the group 3ds max + landscape architecture 13 years, 7 months ago
I’m in
-
Michael Van Beek posted an update in the group 3ds max + landscape architecture 13 years, 7 months ago
hello everyone. i would like to make this competition a reality, if anyone would like to help: set up the framework for the competition, gain attention of land8lounge, gather prizes, ect… i could really use the help as i am working on finishing my thesis currently. PLEASE let me know if you are interested. thanks -michael
-
Michael Van Beek posted an update in the group 3ds max + landscape architecture 13 years, 7 months ago
i think we should have different scales and classes
-
MsM posted an update in the group LA Downunder 13 years, 7 months ago
Hi, Im a final year LA student in Queensland. We are currently working with Flood Of Ideas to produce ideas for flood resilience. Details as follows.
FLOOD OF IDEAS aims to provide a public forum to seek the best and the most creative ideas to respond to the threat of flood and natural disaster in the Queensland community
FLOOD OF IDEAS is a…[Read more] -
Arnot Nooroso posted an update in the group Asia Landscape 13 years, 8 months ago
Dear , All
Hello Landscaper all the world ,I’m joined with Asian Landscape,I want more
to know China Landscape , because has a lot of traditional Garden. -
Ray Freeman posted an update in the group LARE Multiple Choice Discussion 13 years, 8 months ago
Tad, I don’t know why Russ would write it as 1:4. That’s not the “conventional” way of doing it.
-
Tad Hansen posted an update in the group LARE Multiple Choice Discussion 13 years, 8 months ago
Ray and everyone,
I am taking B here shortly but I have a lingering question about the slope steepness ratio method. Norman Booth is writing it horizontal first, verical second 4:1(Basic Elements of Landscape Architectural Design, page 31). Thomas Russ is writing it in reverse 1:4 (Site Planning and Design, Page 125) Is there a reason why the…[Read more] -
Jovo Ivekich, ASLA posted an update in the group LARE Multiple Choice Discussion 13 years, 8 months ago
http://www.flashcardmachine.com/lare-section-a.html
Is a great LARE Section A Flashcard set to look at.
-
Wyatt Thompson, PLA posted an update in the group SketchUp 13 years, 9 months ago
Hey Dave. One way would be to map appropriate landform/vegetation/sky images to a curved background similar to these at SCF. You could also do a search for sky dome at SCF or in the 3D Warehouse. If you intend to fly right up to the edge of the TIN, you might also need to extend the surface out a ways to meet at the image. By matching the…[Read more]
-
Dave Breiter posted an update in the group SketchUp 13 years, 9 months ago
I am working on an animated fly-through of an airport. I have a tin of the actual terrain and have added my 3D model of the airport to the tin. My question for the group is, what do I do to eliminate “the earth is flat” look of my animation. My terrain tin extends in a two mile radius from the airport. I thought about putting a sky/horizon image…[Read more]
-
Ryland Fox posted an update in the group 3ds max + landscape architecture 13 years, 9 months ago
You would have to hace specific rules i.e. how much post production is allowed?
-
Wyatt Thompson, PLA posted an update in the group SketchUp 13 years, 9 months ago
You could also try the Shapebender script by Chris Fullmer. It can be a little complicated to figure out at first, but once you understand what it’s doing, it becomes pretty easy to manipulate. Chris has produced several videos (also posted at the above link) that help explain. If you have questions after watching those I’ll do my best to help.
-
Debbie James posted an update in the group SketchUp 13 years, 9 months ago
Thanks Guys 🙂
@ John, its an iron fence from 3D warehouse, so not too many segments to it.
@ Daniel, hi ya! Yes, I did some what follow the book and downloaded the Path copy, but it did not work at all after several tries…..hmmm maybe I did not do it right cause it clump them together, but not on the arc. I will email you.
thanks guys! -
John Pacyga posted an update in the group SketchUp 13 years, 9 months ago
Fences can be a material (an image applied to a curved surface in your case) or a component which would have segments. I am not sure which is best for your project. You may consider extruding your curved shape as a volume, then deleting everything but the wall in order to place the fence material on a curved surface. The fencing materials ar…[Read more]
-
Debbie James posted an update in the group SketchUp 13 years, 9 months ago
Hi, I am trying to figure out how to apply a fence along an arc path, but cannot for the life of me find anything on it. I tried googling it and looked in the site design book, but nothing. the rotating tool does not work great for an arc line, I don’t think. Its like I have to bend the fence to fit it along the arc, but do not know how…..help!
thanks -
Michael Van Beek posted an update in the group 3ds max + landscape architecture 13 years, 9 months ago
(Land 8 Lounge digital challenge CHAMPION) it should be i picture of a cougar or something badass like that.
-
Zach Watson posted an update in the group 3ds max + landscape architecture 13 years, 9 months ago
I like the idea of a digital badge to put on your profile pic like some site overseers have the 8 logo in theirs
- Load More