Yun

Ya i defentenly plan on trying to use Bioretention techniques, but this is not a exectly a mitigation techniques it is a stormwater solution, i need some way to extract or mitigate the heavy metals that are with in the soil and water on site, bioretention will help in preventing them to go to the stream but then they are still on site in the soil.

Bioretention is a technique that can be used in nearly any environment, including brownfields, as a water quality control. This may be getting too technical for your project, but depending on the amount of on-site contamination, I would recommend that you wrap all of your stormwater BMPs with an impermeable membrane to help control the spread of…[Read more]

i am a landscape architecture student working on my senior project, which is a brownfield site ( old glass manufacture), and curious to see if any one had unique design, mitigation techniques and or a case study i should look in to.

I am currently working on my senior cap stone B.S. – LA project , which is a brownfield site ( old glass manufacture). I was curious to see if any one had any unique mitigation techniques or could refer me to a few good case studies.

Larry these look to be very helpful examples of how other municipalities are implementing these strategies. Good case studies. Thanks for sharing.

you might want to check out this useful doc put out by the epa. its a lot of portland stuff but much more.. Larry Shaeffer
and add to greenstreets links list

link to Municipal Handbook Green Infrastructure
http://cfpub2.epa.gov/npdes/greeninfrastructure/munichandbook.cfm

Green Infrastructure Municipal Handbook

The Municipal Handbook is a series…[Read more]

Well I’ll be honest, I’m very jealous of what you are able to get approved out on the west coast. As of now we seem to be a bit behind the curve but we’re trying to at least catch up with you.

The majority of our office work is around the Washington D.C. metropolitan area (including northern VA and Maryland) and each municipality seems to be at…[Read more]

Well in Australia they use a broader term Water Sensitive Urban Design, as opposed to LID, which refers to 3 areas of water management (Potable Water, Waste Water and Stormwater) and how my effecting one of these you have the potential to effect the others. For instance, by reusing stormwater to irrigate landscape or flush toilets, we also reduce…[Read more]

Philip – that sounds really awesome! I’m looking forward to hearing what was shared, not only from a green streets perspective but would love to hear all about what you are doing in Australia with regards to water design.

Hi everyone. My name is PJ Benenati and I ‘m with EDAW in Alexandria, VA. I look forward to talking with you all and sharing ideas.

Our offices in Australia have been incorporating LID into the landscape for some time now. An environmental firm, called Ecological Engineering, joined with EDAW nearly 4 years ago and is now working mainly out of…[Read more]

i would research xeriscape plants – there are a bunch of native drought tolerant grasses and sedge that could work – Festuca glauca, Muhlenbergia c. …Also some hardy vines like Wisteria or Honeysuckle or Grape – Sedum, Yucca and Agave of course…and you realize this as you mention succulents…Rosemary var., Erigeron, Gaura, Salvia varieties…[Read more]

I am a landscape designer working towards my professional registration as a Landscape Architect. I received my BSLA from Arizona State University in May ’05 and have been working for one of the largest engineering design firms for over 3 years now. Our office has one RLA, but our supervisor is a PE. The main advantage here is that I am learning…[Read more]

I’m trying to develop a specific contract for my firm’s LA work and am trying to find a good sample contract to model ours after.

Thanks!

Can’t wait to see the new method Tony.

Hi Bill,

Exactly, LandFx uses hatch patterns instead of trying to place the poly line around the shrubs, and calling out the emitters in the schedule. I think its much cleaner this way.

No it wont warn you of increased precip rates (we still have to use our brains as designers)…..

I am currently finishing up my last year of a B.S Landscape Architecture at West Virginia University in Morgantown, WV. I am from the Northern Virginia, have worked in all forms of the field from nursery sales, installation, inspection, and design. I aspire to be a master at my skill. I would like to design Sustainable Urban Sites, with creative,…[Read more]

Yeah, it looks like a great time saver. Although anything is faster then the way I do it, so I’m probably no the best person to judge. Are you asking if you should draw in the spaghetti and/or the poly? Too much detail is a waste IMO. The contractor won’t follow it anyway. The hatch patterns look fine. You’ve called out the emitter size for each…[Read more]

Hello folks,

I have uploaded a sample drip plan that I designed using LandFx irrigation. (I’ve been using the software for 5 years now) I’d like to know what you think of the way LandFx handles drip irrigation. The page also explains how LandFx calcs the drip areas (its very cool.)

http://www.atomicirrigation.com/example_drip.html

mark

Let’s discuss it over the phone as it’s better for Q&A situations. Call me at 801-295-5335 days and early evenings. I’m usually in, don’t leave message. Dave Racker, FASLA

Hello all,

Anyone use Landfx for Drip??? Im starting an irrigation project and id love to get another opinion about using the hatch patterns vs drawing in the flex hose/emitters…..

m