[Zdenek Fajfrlik]

Thank you very much! Stan

[Zdenek Fajfrlik]

yes, sir, skp as model + lumion pure….
regards
stan

[Zdenek Fajfrlik]

hi dan,
i think, lumion is also a good choice,
very good skp & dae import, easy use, good and quick results.

http://www.lumion3d.com

some examples in my photos or on my web.

regards stan

[Zdenek Fajfrlik]

hello,
i am not sure, if this offer is still actual, but if so, maybe i can do something with sketchup & more.
if you like to take a look at
http://www.artmusicstudio.de/a_en.htm

and

http://www.artmusicstudio.de/ruby.htm

modelling is always skp , followed by some vis-work.

i live in germany and work as free architect for over 20 years now.

(btw: is AMS not interesting in this context?

regards stan

[Zdenek Fajfrlik]

hello,
i am always interested in interesting work in 3d…..
regards stan

http://www.artmusicstudio.de – video

href=”http://www.artmusicstudio.de/ams_cz/show_overview4.htm”
target=”_blank”>http://www.artmusicstudio.de – examples

http://www.artmusicstudio.de

[Zdenek Fajfrlik]

hi,
i can strongly recommend lumion, even for big landscape projects. i have some samples in my fotos, all renderings are made with lumion 3 ( 4 is even better). more from lumion on my web and on the lumion site

this video is also made with lumion (preview)

http://www.artmusicstudio.de/ams_cz/show_big_a_cz_5_vid1_mov.htm

http://www.lumion3d.com
regards stan

[Zdenek Fajfrlik]

hi, more info about “managing” the controllers of texture

1. click on the pin
2. set the pin at a point of a texture, you want to fix to a construction
3. move the pin now to the desired construction point / edge etc

as far , as i know, you cannot enter “degrees” for rotating a texture, but moving exactly to the point brings you the same effect (works also with stretching, moving and so on)

regards stan

[Zdenek Fajfrlik]

hi, i use a nice simple ruby called
“helicoidal ramp 1.0”

1. create and mark two 2d curves
2. right-click the selection and choose the script
3. select hights
4. ramp is created
5. use shift+eraser for “hiding” the lines in the ramp-surface OR select all lines and edit the item properties (hidden)

regards
stan

[Author]

Posts