Question About Right out and Right in for Gas Station

This topic has 1 reply, 1 voice, and was last updated 15 years, 10 months ago by Chunling Wu.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
January 11, 2009 at 4:01 pm #175635

Chunling Wu
Participant

Hey guys…It’s grt if you can help me on it. I don’t know American rules for enterance, but now I need layout a gas station for some company.
What situation (site layout) would you use RIRO (right out-Right in) enterance for a gas station? Is it along with the street, or in the parking lot of retails or it’s in a small site with 1 enterance?
Could you give me some picture or draft if it’s easy to do that.
Really appreciate it.

January 12, 2009 at 2:06 pm #175640

Chunling Wu
Participant

Robert,
Really thank you. You gave me ideas for driving flow.
Actually I got a layout from US office today. It’s a RIRO from cutting curb. I’d like to show you that tomorrow, maybe you could explain a little bit on layout.
Another question is do you know AutoTurn on your project? Because I saw civil is also your employment.

January 13, 2009 at 12:06 pm #175639

Chunling Wu
Participant

Did you see this situation?

January 15, 2009 at 11:24 am #175638

Chunling Wu
Participant

Actually it’s one of the options from US office.
This is a typical retail site in US like the area of Kroger or Food 4 Less. I can’t show entire site for some regulations.
I have same feeling like you, it’s not an option I can understand either. When they asked me offer an option with RIRO, I had no idea for that, I thought the right access is the existing RIRO, basically, curbing-cut is not first choice for budget.
Since you know AutoTurn, can I also ask you more questions for that? From the drawing, you can see the flowing of truck is random. I will list my questions tomorrow.
Really thank you for help!!
Terri

January 19, 2009 at 12:41 pm #175637

Chunling Wu
Participant

The second printscreen is my work, setting pline, use “offset simulation” to get a truck tracing.
I didn’t use “generate arc path” because it’s random, I can not control the radius of turning and how much curb would be cut.
The first printscreen is an example I had, and you could see they use different way,I have 3 questions for AutoTurn- a. what’s the key thinking when putting truck. B. how to find proper control points? C. why the tracing wheels could be shown in 2 ways.

Could you show me how do you use it?
Thank you. 🙂

January 22, 2009 at 12:52 pm #175636

Chunling Wu
Participant

It’s ok. Any helpful mentoring is welcome from my side. 🙂
Author

Posts