Alexis GERARD

Bioretention is a technique that can be used in nearly any environment, including brownfields, as a water quality control. This may be getting too technical for your project, but depending on the amount of on-site contamination, I would recommend that you wrap all of your stormwater BMPs with an impermeable membrane to help control the spread of…[Read more]

i am a landscape architecture student working on my senior project, which is a brownfield site ( old glass manufacture), and curious to see if any one had unique design, mitigation techniques and or a case study i should look in to.

Larry these look to be very helpful examples of how other municipalities are implementing these strategies. Good case studies. Thanks for sharing.

you might want to check out this useful doc put out by the epa. its a lot of portland stuff but much more.. Larry Shaeffer
and add to greenstreets links list

link to Municipal Handbook Green Infrastructure
http://cfpub2.epa.gov/npdes/greeninfrastructure/munichandbook.cfm

Green Infrastructure Municipal Handbook

The Municipal Handbook is a series…[Read more]

Well I’ll be honest, I’m very jealous of what you are able to get approved out on the west coast. As of now we seem to be a bit behind the curve but we’re trying to at least catch up with you.

The majority of our office work is around the Washington D.C. metropolitan area (including northern VA and Maryland) and each municipality seems to be at…[Read more]

Well in Australia they use a broader term Water Sensitive Urban Design, as opposed to LID, which refers to 3 areas of water management (Potable Water, Waste Water and Stormwater) and how my effecting one of these you have the potential to effect the others. For instance, by reusing stormwater to irrigate landscape or flush toilets, we also reduce…[Read more]

Philip – that sounds really awesome! I’m looking forward to hearing what was shared, not only from a green streets perspective but would love to hear all about what you are doing in Australia with regards to water design.

Hi everyone. My name is PJ Benenati and I ‘m with EDAW in Alexandria, VA. I look forward to talking with you all and sharing ideas.

Our offices in Australia have been incorporating LID into the landscape for some time now. An environmental firm, called Ecological Engineering, joined with EDAW nearly 4 years ago and is now working mainly out of…[Read more]

Hi Bill,

Exactly, LandFx uses hatch patterns instead of trying to place the poly line around the shrubs, and calling out the emitters in the schedule. I think its much cleaner this way.

No it wont warn you of increased precip rates (we still have to use our brains as designers)…..

Yeah, it looks like a great time saver. Although anything is faster then the way I do it, so I’m probably no the best person to judge. Are you asking if you should draw in the spaghetti and/or the poly? Too much detail is a waste IMO. The contractor won’t follow it anyway. The hatch patterns look fine. You’ve called out the emitter size for each…[Read more]

Hello folks,

I have uploaded a sample drip plan that I designed using LandFx irrigation. (I’ve been using the software for 5 years now) I’d like to know what you think of the way LandFx handles drip irrigation. The page also explains how LandFx calcs the drip areas (its very cool.)

http://www.atomicirrigation.com/example_drip.html

mark

Let’s discuss it over the phone as it’s better for Q&A situations. Call me at 801-295-5335 days and early evenings. I’m usually in, don’t leave message. Dave Racker, FASLA

Hello all,

Anyone use Landfx for Drip??? Im starting an irrigation project and id love to get another opinion about using the hatch patterns vs drawing in the flex hose/emitters…..

m

No rush, best of luck on the exam.

Here’s an example of the political aspect of planning and landscape architecture:

Nrschmid:
“However, some of them [landscape architects] struggle to find the underlying meaning in the ordinances and what has been established by plan commissions as precedent. For example, one community’s ordinance might allow Betula nigra (River birch) but the r…[Read more]

Zoning is way to control activities, which is important for a city. But as we all know cities are dynamic, some people even suggest that the city is a living organisim. froming this point of view, “zoing” should work in different ways comparing with exisiting and conventional “zoning” practices.
I think “zoning” is also a tool for the authority to…[Read more]

Well, that wasn’t he part of the quote that I was trying to emphasize, I’m not going to stand here and say that the government has cornered the market on corruption, the argument really isn’t about morality, its about social functions.

You are entitled to your assessment of Jane Jacob’s work but her contribution to urban design theory is…[Read more]

Good points, I suppose another important distinction to draw as we continue the conversation is that a planner’s role will vary greatly depending on if he or she is employed by a municipality or by a private sector consulting firm.

I suppose what I meant in my earlier post is that I have been impressed by the work of the private sector planners…[Read more]

nrschimid,

I know a few LA/Planners. AICP is a cool credential to have behind your name, a good friend of mine (who is a planner) says it stands for “Any Idiot Can Plan”.

Planning is an interesting subject. There are many professions that recognize the importance of good planning in our built environment but we take many different avenues to…[Read more]