Bruce McWilliam Associates Landscape Design Group 778-809-9784

thanks Vladimir for the comment, I agree competitions need to be transparent, it’s good to be reminded that we live in the world of politics and connections. SO even if u have the very good design u will be a winner, sad truth…..
It reminds me one competition I idid in Lodz,Poland where the winner for the big square had a photo of Toronto…[Read more]

Before you embark on any competition I advise you to check the political context. Bevare of any competition that has politicians as judges. Anglo – saxon countries have tendency to compromise the results and often completely change the outcome.
One such competition just happened In Sydney (Darling Harbour East) where due to unacceptable meddling…[Read more]

Hi all.. I just joined the group..I use eaglecad for irrigation projects for 7years. It also runs in Autocad. You may test yourself by freeware version if you want…
Greeting from İstanbul…

Design Montreal’s Bus Shelters

competition for a new bus shelter, including the advertising poster
frame, bench and solar power system, to be used by the Société de
transport de Montréal (STM)The deadline for submitting entries is noon on September 30, 2009. Note documents in French 🙂
more info
http://two.archiseek.com/archives/5696

i am interested to set up online landscape design company for project in middle east and like to invite landscape architect to work online on project base.
mustafa kamal
mail@hortigroup.com.pk

Wide Open Ideas Competition for Tiananmen Square in Beijing, China
generate debate and ideas for re-designing part of the most important urban space in the history of Chinese Civilization. We hope this will also set a new course for Eastern Landscape Architecture, helping in the development of an ecologically and culturally distinctive design…[Read more]

I have questions about Vectorworks.. one of that is.. when I use VW for 3d site modeling, it becomes so slow.. I made layers simple, even classes.. But still slow..
I’m using ‘i-mac’ resent version. How I can make it faster? Change Graphic Card?
Up Grade Memory? Is there anybody knows about VectorWorks?

Rob-

We use Land FX; which it sounds like the same setup as Raincad. It is extremely simple to pick up on and their support is like no other. We have been using it for almost 5 years now without one complaint. I would give them a call and talk to their rep if you are interested.

Thanks! I’ll try it! I really want to be good at visualizing.. !!

I use mostly Photoshop for my renderings, I have dabbled a bit in Corel Painter, and Corel Painter Sketchbook, but I really like photoshop. The trick to the water is its is an image that I found on Google images and distorted into perspective in Photoshop and then pasted into the image…

This looks good. What program do you usually use for this? Especially I like that water
texture. I want to learn it!

something to look at… please provide comments, questions, or criticism. thanks
Bob

Yes, the meeting went great! Stacy summed it up pretty good. It was fantastic to have Dominique come in and talk with us about her experiences using SSI on a project. From our discussions, we know there are a lot of kinks in SSI (as one would expect) but my feeling from her was that the document works well in establishing that necessary baseline…[Read more]

I thought it was great – especially Dominique’s experience with SSI for Lenexa City Center project. Several of the pre-requisites were un-achievable on that one. Those points were very worthy, highlighted the critical importance of proper site selction and deemed certainly worth keeping central in the SSI focus, but totally screwd the pooch (so to…[Read more]

Matt- How did the meeting go?

No problem, Radu! Glad to help.

As for the conceptual design, it should be a general routing plan with generic bunkering and golf course character. You would want to establish number of tees, size of tees and greens, etc. so that you could generate an estimate. Other things, like drainage, earthwork, etc. would have to come from past experience…[Read more]

Ryan and Chad thnx a lot great tips, its very usefull for me to learn from someone who has experiance. In Romania the golf buissnes is at the start there is not yet a high quality golf course in Romania nad playing golf its very hard here, there are no profesionals in my country on golf course design and construction, so there is space for this…[Read more]

Radu, Ryan’s comments are on point. Of course, not everyone can do a conceptual design for the project before being awarded the project. We never did this when I was in the golf business. We always got paid for conceptual design, which is where we started with our fee, then if we determined the project was feasible, we rolled into CD’s and project…[Read more]

Hi Matei–
All golf course design projects are unique from one to another and each has their own variables and client needs / desires. So there is no formula or guide that I’m aware of that you can work through and come up with a design fee proposal.

My experience has been that the design team will typically receive 5-7% of the construction costs…[Read more]

I’ve used Auto Cad for 7years and I have to move on Vector Works for a new Company. It’s so confusing and not so much information so far.. Tutorials don’t really give me right answers and I have many problems to figure out, but it’s difficult ask somebody.. Not so many people are using this..