-
Raysa Molina posted an update in the group Graphics 15 years, 5 months ago
hi, i’d been trying to blend hand drawing with computer, and i think i got a really good renderings. after i apply style in sketchup, i draw the vegetation by hands and put it on top in photoshop. when i Apply color in photoshop, i use the wet brushes. So check my renderings and if you like I can give you more tips.
-
nca posted an update in the group Graphics 15 years, 5 months ago
I like your stuff Bob, I would like to see it a bit bigger.
-
nca posted an update in the group Graphics 15 years, 5 months ago
Aaron-
Are you talking about getting pics up onto this group discussion or onto your folio? I always use the ‘simple uploader’ when uploading to my folio, I find it less glitchey as you mentioned. For posting here, just hit the camera button above and make sure you image is in an acceptable format (jpeg) and 72-150 dpi and less than about 500…[Read more]
-
Aaron R. Goetz posted an update in the group Graphics 15 years, 5 months ago
I’m still getting an X when I upload. I’m finding this site very glitchy. Slow uploads, freezing up, inability to close down, etc.. Anyone else having these issues? How can I get my darn pics up??
-
Bob Luther posted an update in the group Graphics 15 years, 5 months ago
sucess… thank you Nick, we may be able to go a little wider but these settings are much better… now we can post some images and give some better feedback.
-
Bob Luther posted an update in the group Graphics 15 years, 5 months ago
Here is my test to see if the settings sugested will work, 400 pix wide and 100dpi -
nca posted an update in the group Graphics 15 years, 5 months ago
I think if you size the width of your images to about 400pixels wide that should fit just right, also you (everyone) should do everyone else a favor and keep your dpi under 150…more like 100 or even 72 to avoid sluggish scrolling.
-
Bob Luther posted an update in the group Graphics 15 years, 5 months ago
Again why do some of the images get stretched out while others look fine… I am guessing that there is some kind of ideal image size for the group walls, does anybody know what that size limit is so that we can actually see what people are posting? Vladimir’s images are all stretched out while right below his Nick’s look perfect, is any one else…[Read more]
-
Jay Everett posted an update in the group LEED in Landscape Architecture 15 years, 5 months ago
I cannot speak to PTLexamprep, but I can say that greenexamprep is fairly accurate when they claim that if you can score over 80% on their tests then you are probably pretty well prepared for the actual exam. Hang in there.
-
nca posted an update in the group Graphics 15 years, 5 months ago
I thought I would contribute some different digital and hand techniques I’ve experimented with over the last few semesters as an undergrad. Before I returned to school for Landscape Architecture I enrolled in a 12 month cad drafting course and read all the landscape graphics books I could get my hands on, which still seem sort of…[Read more]
-
Lee Attinger posted an update in the group Graphics 15 years, 5 months ago
Does anybody have any suggestions or examples for rendering a master plan in a desert environment? I’m trying to finish up my capstone project so I can graduate and I’ve run into a little snag. I go to school in the south so drawing a rocky barren landscape with clusters of cactus is a first.
-
Bob Luther posted an update in the group Graphics 15 years, 5 months ago
what is the best size of image so that it does not distort, I noticed that many of the images, including mine are being stretched into a tall and “squeezed” format, are these do to i9mage size or my computer settings?
-
Jay Everett posted an update in the group LEED in Landscape Architecture 15 years, 5 months ago
Yeah, you’re probably just over thinking it a little. I used the chart in the LEED AP Walkthrough, which is probably the same as the one on IntheLeed.com. I will say that there weren’t that many questions that related directly to project roles in the particular question pool that I had when I sat for the test (maybe 5), what I can say is that…[Read more]
-
Bob Luther posted an update in the group Graphics 15 years, 5 months ago
thought I would add a few images, I work mostly digital but started with ADs, Prismacolors, and pencil, Am loving Corel Sketchpad, Corel PainterXI, and Photoshop, base work is done in AutoCad, Sketchup, Sketchpad, or scanned original, rendered on Wacom Cintiq in combination of Painter and Photoshop… -
Drew Sivgals posted an update in the group Graphics 15 years, 5 months ago
Great to see examples of everyone’s work!
-
Jay Everett posted an update in the group LEED in Landscape Architecture 15 years, 5 months ago
Anyone still studying to pass under LEED 2.2:
There are 2 resources that I used to study that I think were critical to success, I think these have been mentioned before but If you’re on the fence about what resources to spend your money on here’s what I think are the two best values:I have to throw my support behind Intheleed.com’s LEED AP…[Read more]
-
Jay Everett posted an update in the group LEED in Landscape Architecture 15 years, 6 months ago
GCBI WEBCAST: NEW LEED CREDENTIALS
this is a very helpful video that explains the new credential system for LEED 2009/3.0 -
Oona Johnsen posted an update in the group LEED in Landscape Architecture 15 years, 6 months ago
FYI – Public comments on the Guidelines and Performance Benchmarks Draft 2008 are now posted on the Sustainable Sites Initiative website for review. http://www.sustainablesites.org/report/
-
Adit Pal posted an update in the group LEED in Landscape Architecture 15 years, 6 months ago
Try this website for requirements to remain accredited – scroll down to see the answers:
http://www.everblueenergy.com/leed-exam-prep-leed-2009-update.html -
Matthew Durkovich posted an update in the group DESIGN 15 years, 6 months ago
Brandon,
What year did you graduate from USU? I’m a BLA ’06 myself. Your stuff looks awesome. What is the name of your firm?
- Load More