-
Pascu Andreea posted an update in the group
SketchUp 15 years, 2 months agoHi. I know it might sound stupid, but I still couldn’t figure out how you drag a copy in SketchUp. I can’t find any Move/Copy tool. 🙁 Hope someone can help.
Thanks. -
Doug Prouty posted an update in the group
Irrigation Design 15 years, 2 months agoHas anyone designed a commercial or residential irriation system with HTPE pipe?
-
Jessie He Hong posted an update in the group
Therapeutic Landscapes Network 15 years, 2 months agoi m start working on my thesis, my topic is about Japanese Zen garden on its therapeutic function. is there anyone familiar with Zen garden or any relate area?
-
Michael Van Beek posted an update in the group
3ds max + landscape architecture 15 years, 2 months agoplease upload any work you may have done to the discussion forum entitled: “the gallery” there is some new stuff if you want to check it out… scroll to the bottom…
-
Gil Lopez posted an update in the group
COMPETITIONS – ongoing 15 years, 2 months agoONE PRIZE 2011: WATER AS THE SIXTH BOROUGH
January 10, 2011: Registration opens; Question period opens April 30, 2011: Registration closes
Entry fees:
$200 Firm entry
$100 Student entry
Prizes:
ONE PRIZE Cash Award of $10,000 Press coverage by One Prize media sponsors.Presentation of Designs at the Award Ceremony and Exhibition. Prom…[Read more] -
Eric Shepley posted an update in the group
SketchUp 15 years, 2 months agoThanks for the help.
-
Patrick Webb posted an update in the group
SketchUp 15 years, 2 months agoDoes the area obstructed show up in the image after capturing? I have had it look like it was clipped, and then after saving the view for the animation it worked.
-
Wyatt Thompson, PLA posted an update in the group
SketchUp 15 years, 2 months agoEric, I’ll try and help but I need some more info. It might be that you’re experiencing a known “clipping” problem. That usually occurs when your model is located really far from the origin. Is that the case? Does the problem occur in all the time, or just in certain scenes? Could you repost the image from a different vantage point with the axis…[Read more]
-
Eric Shepley posted an update in the group
SketchUp 15 years, 2 months agoI am having issues with an aerial view of a site I’m trying to create a fly through for. When I position the camera, some of the area is obstructed like there is a plane in from of part of the view. Any suggestions?
-
Andrew Spiering posted an update in the group
SketchUp 15 years, 3 months agoHey John,
Your blog looks great! We’ve added it to our blog roll. Keep up the good work… -
Steve Mercer posted an update in the group
SketchUp 15 years, 3 months agoBelieve me, if I could do it all in SketchUP Pro I would! The problem is that for Construction Drawings and Deliverables and for importing Civil Data from Survey Instruments, SketchUP is not your best tool. It lacks the 2d CAD capablilities of a standard CAD package. It is getting better though. BricsCAD (or -let me hold my nose here- Auto…[Read more]
-
Steve Mercer posted an update in the group
SketchUp 15 years, 3 months agoHi David and John!
See my discussion “Land FX plug-in for Sketchup” When I was talking with Stephanie I included a typical work flow.
Hope this helps!
s. -
John Pacyga posted an update in the group
SketchUp 15 years, 3 months agoDo you have a topic to contribute to the SketchUp Land blog shown above or a pressing question you would like answered? Let me know!
-
marcial andan flores posted an update in the group
DESIGN 15 years, 3 months agohello guys…
glad to join the group. -
Jarrod Katzer posted an update in the group
L.A.R.E. – ANYTHING GOES 15 years, 3 months agoLet me just add to my last with a couple of tidbits. Don’t worry about taking all the tests at once. I have not noticed a lot of overlap – each section almost entirely pertains to its stated material. Frankly, I think folks that say “that test had nothing but section # material on it!” likely did not prepare long enough to know that they were be…[Read more]
-
Ray Freeman posted an update in the group
L.A.R.E. – ANYTHING GOES 15 years, 3 months agoI’ve posted a notice for my upcoming LARE ABD Workshop in January under the events section of this site.
Ray -
Jarrod Katzer posted an update in the group
L.A.R.E. – ANYTHING GOES 15 years, 3 months agoYou’re welcome. I hope it helps. I’m using this method now to study for Section B.
-
Jarrod Katzer posted an update in the group
L.A.R.E. – ANYTHING GOES 15 years, 3 months agoI’ve taken two of the three multiple choice exams and passed those two the first time using the following method. I wrote a blog entry somewhere on this site expanding on this method but here it is in a nutshell: It may seem strange at first but it works – apparently. You should know I have no LA degree so I had even that much more of a hand…[Read more]
-
Elizabeth Renton posted an update in the group
L.A.R.E. – ANYTHING GOES 15 years, 3 months agoI might suggest that taking A&D at the same time might be a good approach as well. There was quite a bit of material that seemed to overlap on the 2 tests…might as well study it all at once!
I took all 3 at the same time. It is indeed doable if you follow Ray’s suggestions. I spent about 6 weeks studying intensively…an hour or two every…[Read more] -
Ray Freeman posted an update in the group
L.A.R.E. – ANYTHING GOES 15 years, 3 months agoTaking all 3 multiple choice tests at the same time is doable, but a lot depends on the individual.
Are you over-worked? (Sadly those employed generally are, due to the “attrition” the profession has experienced)
Do you have kids, significant others, sick parents, do a lot of onerous volunteer work?
How focused are you at test preparation?
If…[Read more] - Load More
Nathalie Huot
Login
Lost Password
Register
If this is your first time on the new site, please click "Forgot your password?". Follow the steps to reset your password. It may be the same as your old one.