Timothy Garvin

Great, thanks for the help!
 
I think I’m going to buy the LaGro book to start with and try to get the other ones through interlibrary loan (which never even occurred to me at first). 
 
I would eventually like to buy all of them, but that’s almost $600 for all the books (used), exam fee, and study guides, so that’ll have to wait. 

The test had questions from all four books.  I think the Site Analysis by LaGro would be the most important followed by the Booth and Russ books.  I suggest you read them all though if you are serious about passing the exam.  They are great books to have in your library for referencing throughout your career so make the investment if you can. Als…[Read more]

Jessica, you should be able to get all these books at your local library through interlibrary loan.

Jessica,
 
I have Site Analysis, and Site Planning & Design Handbook.  I read both of them, but only skimmed the Site Planning book.  Definitely read Site Analysis and get the PPI study material, and maybe the CLARB practice test.  That is what got me to pass this time.
 

Hey Daniel – I have a quick (hopefully) question. I tried to create a shade structure, but I can’t seem to figure out how to control the direction the fabric is taking. On the attached SU file, I would like the fabric to have a downward curve (showing the gravity) and instead I have an upward curve. Is there a quick way of changing the curve……[Read more]

Tad, I don’t know why Russ would write it as 1:4. That’s not the “conventional” way of doing it.

Ray and everyone,
 
I am taking B here shortly but I have a lingering question about the slope steepness ratio method.  Norman Booth is writing it horizontal first, verical second 4:1(Basic Elements of Landscape Architectural Design, page 31).  Thomas Russ is writing it in reverse 1:4 (Site Planning and Design, Page 125) Is there a reason why the…[Read more]

http://www.flashcardmachine.com/lare-section-a.html
Is a great LARE Section A Flashcard set to look at.
 

Oohh yes, remember the 7200 PowerMac I had sitting in the LA studio? Maybe not. But, I donated it in 2005 while living in Las Vegas. It finally became to slow for internet use and I maxed out on RAM and hard drive storage for it. Those were some great times, in school, huh? Work on projects with no budgets and endless time spent on it. Too bad it…[Read more]

Hey Dave. One way would be to map appropriate landform/vegetation/sky images to a curved background similar to these at SCF. You could also do a search for sky dome at SCF or in the 3D Warehouse. If you intend to fly right up to the edge of the TIN, you might also need to extend the surface out a ways to meet at the image. By matching the…[Read more]

I am working on an animated fly-through of an airport. I have a tin of the actual terrain and have added my 3D model of the airport to the tin. My question for the group is, what do I do to eliminate “the earth is flat” look of my animation. My terrain tin extends in a two mile radius from the airport. I thought about putting a sky/horizon image…[Read more]

Oh, Robert, still the Mac Man! What happened to San Diego?

How are you all fairing? Running on my 3rd week of unemployment today. hoping to go back in the next month, but who knows?

Aloha! Unfortunately, I haven’t been back to Moscow since leaving in December 1998. I heard about all the changes on campus via my weekly Vandal email report. I lived in the LA studio, library and Art department’s McIntosh computer lab. Those PowerMacs were awesome!

Oldster alert….85 grad here.

You could also try the Shapebender script by Chris Fullmer. It can be a little complicated to figure out at first, but once you understand what it’s doing, it becomes pretty easy to manipulate. Chris has produced several videos (also posted at the above link) that help explain. If you have questions after watching those I’ll do my best to help.

Thanks Guys 🙂
@ John,  its an iron fence from 3D warehouse, so not too many segments to it.
@ Daniel, hi ya!   Yes, I did some what follow the book and downloaded the Path copy, but it did not work at all after several tries…..hmmm maybe I did not do it right cause it clump them together, but not on the arc.  I will email you.
 
thanks guys! 

Fences can be a material (an image applied to a curved surface in your case) or a component which would have segments.  I am not sure which is best for your project.  You may consider extruding your curved shape as a volume, then deleting everything but the wall in order to place the fence material on a curved surface.  The fencing materials ar…[Read more]

Hi,  I am trying to figure out how to apply a fence along an arc path, but cannot for the life of me find anything on it. I tried googling it and looked in the site design book, but nothing. the rotating tool does not work great for an arc line, I don’t think.  Its like I have to bend the fence to fit it along the arc, but do not know how…..help!
thanks

Curly,
 
The LATC has it’s own standards on eligibility to take the exam. You can get info off their web site.
 
The webinars are recorded. I think if you register as a pro member thru Land 8 you can view the webinar content at your leisure. Check with Andrew Spiering (the founder of the site) on procedures.