SketchUp

  • Alba Villacampa Sanz posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    Hi Daniel!
    I became a promember of Land8 and I´m seeing some of Daniel Tal´s webinars on Sketchup. They are really easy to follow and very useful. There are also some photoshop webinar recordings but I haven´t been able to see those yet.
    Hope this helps!

  • Daniel Edwards posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    Hey There,
    I have spent the last 3 years in a technical project management position and have become a bit rusty in the are of computer graphics using Sketchup and Photoshop in combination with each other.  Obviously, this is such an integral part of practicing our profession these days so I want to get better at this.
     
    I live in the Portland, O…[Read more]

  • Denis Vasiliev posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    Quite useful!

  • Hilary Ann Noonan posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    I had problems the whole time I was in school with my desktop crashing because my video card didn’t have enough umph. What solved the problem was more memory in the video card itself. You can also check the auto-cad sight to make sure any card you are thinking of getting is ok with auto-cad. The laptop I bought when I graduated is a 64-bit with a…[Read more]

  • Cendra Ramirez posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    Awesome… thanks for the tips… that’s exactly what I was looking for.
    THANKS!

  • Frank Varro posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    I can attest to newer Geforce cards.  I have a 470 from last year, and it runs like a champ.  MIGHT end up going to a dual card setup, but that’s caused more by “Battlefield 3” than work…

  • Cendra Ramirez posted an update in the group Group logo of SketchUpSketchUp 10 years ago

    Can anyone recommend me a video card to be able to work on Sketch up, photoshop, illustrator and CAD? I am getting a new computer and wanted to see the minimum requirements I should have to support all those software.

    Thank you

  • MV posted an update in the group Group logo of SketchUpSketchUp 10 years, 1 month ago

    Hy everybody¡¡ what about the shaderlight ?

  • HUSSEIN KIWAN posted an update in the group Group logo of SketchUpSketchUp 10 years, 1 month ago

    Dear Zach,,,,Thank you very much for such valuable information,,,one more question ,,,Is there are many differences between the free version and payable one ?,,,,best regards,,,,kiwan

  • Zach Watson posted an update in the group Group logo of SketchUpSketchUp 10 years, 1 month ago

    In regards to the first comment about the program operating very slow, I would guess that either there are so many objects in the file that it is making the program run slow, or hardware on your computer such as your CPU and/or your Memory are not fast enough for the program.  In regards to the CAD to Sketchup, Google removed that option in the…[Read more]

  • HUSSEIN KIWAN posted an update in the group Group logo of SketchUpSketchUp 10 years, 1 month ago

    Dears,,,,I am facing problem in sketch up 8,,,in moving cursor ,,,,and very slow,,,to rotate or flipping the models ,,is this problem cause i am using free version ,,,and i can not to import the CAD,s FILES ,,,,,PLZ ADVICE ,,,

  • Steven Bauer posted an update in the group Group logo of SketchUpSketchUp 10 years, 3 months ago

    Daniel,
    I like the Dynascape SketchUP.  Is the Dynascape easy to work with using their SketchUP landscape SketchUP plant materials? 

  • Frank Varro posted an update in the group Group logo of SketchUpSketchUp 10 years, 3 months ago

    Looking good as always Daniel! My only complaint is the people, in that I hate them, in that I don’t have them. I’ll send you some of my newer stuff today to see what you think.

  • Craig T posted an update in the group Group logo of SketchUpSketchUp 10 years, 3 months ago

    What rendering tool did you use for that model?

  • Craig T posted an update in the group Group logo of SketchUpSketchUp 10 years, 3 months ago

    Does anyone have an opinion about the value of Dynascape for SketchUp – the plant library in particular?

  • Cendra Ramirez posted an update in the group Group logo of SketchUpSketchUp 10 years, 4 months ago

    Hey Daniel – I have a quick (hopefully) question. I tried to create a shade structure, but I can’t seem to figure out how to control the direction the fabric is taking. On the attached SU file, I would like the fabric to have a downward curve (showing the gravity) and instead I have an upward curve. Is there a quick way of changing the curve……[Read more]

  • Wyatt Thompson, PLA posted an update in the group Group logo of SketchUpSketchUp 10 years, 6 months ago

    Hey Dave. One way would be to map appropriate landform/vegetation/sky images to a curved background similar to these at SCF. You could also do a search for sky dome at SCF or in the 3D Warehouse. If you intend to fly right up to the edge of the TIN, you might also need to extend the surface out a ways to meet at the image. By matching the…[Read more]

  • Dave Breiter posted an update in the group Group logo of SketchUpSketchUp 10 years, 6 months ago

    I am working on an animated fly-through of an airport. I have a tin of the actual terrain and have added my 3D model of the airport to the tin. My question for the group is, what do I do to eliminate “the earth is flat” look of my animation. My terrain tin extends in a two mile radius from the airport. I thought about putting a sky/horizon image…[Read more]

  • Wyatt Thompson, PLA posted an update in the group Group logo of SketchUpSketchUp 10 years, 7 months ago

    You could also try the Shapebender script by Chris Fullmer. It can be a little complicated to figure out at first, but once you understand what it’s doing, it becomes pretty easy to manipulate. Chris has produced several videos (also posted at the above link) that help explain. If you have questions after watching those I’ll do my best to help.

  • Debbie James posted an update in the group Group logo of SketchUpSketchUp 10 years, 7 months ago

    Thanks Guys 🙂
    @ John,  its an iron fence from 3D warehouse, so not too many segments to it.
    @ Daniel, hi ya!   Yes, I did some what follow the book and downloaded the Path copy, but it did not work at all after several tries…..hmmm maybe I did not do it right cause it clump them together, but not on the arc.  I will email you.
     
    thanks guys! 

  • Load More

Lost Password

Register