Frank Varro

Thanks Guys 🙂
@ John,  its an iron fence from 3D warehouse, so not too many segments to it.
@ Daniel, hi ya!   Yes, I did some what follow the book and downloaded the Path copy, but it did not work at all after several tries…..hmmm maybe I did not do it right cause it clump them together, but not on the arc.  I will email you.
 
thanks guys! 

Fences can be a material (an image applied to a curved surface in your case) or a component which would have segments.  I am not sure which is best for your project.  You may consider extruding your curved shape as a volume, then deleting everything but the wall in order to place the fence material on a curved surface.  The fencing materials ar…[Read more]

Hi,  I am trying to figure out how to apply a fence along an arc path, but cannot for the life of me find anything on it. I tried googling it and looked in the site design book, but nothing. the rotating tool does not work great for an arc line, I don’t think.  Its like I have to bend the fence to fit it along the arc, but do not know how…..help!
thanks

(Land 8 Lounge digital challenge CHAMPION) it should be i picture of a cougar or something badass like that.

I like the idea of a digital badge to put on your profile pic like some site overseers have the 8 logo in theirs

think there should be a small fee so there could be a prize? idk how this would work but i would like to put something up make things real. we should come up with a digital badge for your profile… that would be cool.
 

well, any suggestions would be appreciated… its still a concept now so lets make it great. i want some excitement…

Personally, I would rather see it opened up to other render engines as well, partially because I use a different one than 3DS now, and also because it would be a good way for people unfamiliar with the strengths of different programs to see what they can do.

bring it on 😛

start start start 😀

start the competition ;))

has anyone used ‘view’ seems like a really good program im about to start learning… any suggestions?

That’s great. Thank you! I’ve got your book, but I couldn’t find that one in there, shame on me if it was there..too tired! Thanks again.

Yes that was it!!! it works. Too bad there is no list of all these shortcuts, that would help a LOT. Thank you so much.

Not a bad question to ask at all.  The easiest way is to select an item with the black arrow key [or hit spacebar]. Then click the Move tool which has arrows in all directions and can be found in the Large Tool Set or the Getting Started Toolbar [or hit M on the keyboard].  After the item is highlighted and you have the Move tool selected, hol…[Read more]

Hi. I know it might sound stupid, but I still couldn’t figure out how you drag a copy in SketchUp. I can’t find any Move/Copy tool. 🙁 Hope someone can help.
Thanks.

please upload any work you may have done to the discussion forum entitled: “the gallery” there is some new stuff if you want to check it out… scroll to the bottom…

ONE PRIZE 2011: WATER AS THE SIXTH BOROUGH
January 10, 2011: Registration opens; Question period opens April 30, 2011: Registration closes
 
 

Entry fees:
$200 Firm entry
$100 Student entry
 
 
Prizes:
ONE PRIZE Cash Award of  $10,000 Press coverage by One Prize media sponsors.Presentation of Designs at the Award Ceremony and Exhibition. Prom…[Read more]

Thanks for the help.

Does the area obstructed show up in the image after capturing? I have had it look like it was clipped, and then after saving the view for the animation it worked.