Justin R. Bell

LARE Review Study Session- Section C & EThe Louisiana Chapter ASLA is hosting review sessions for the upcoming LARE exam for sections C&E on Saturday, April 9 from 8:30 am to 3:45 pm at the Shaw Center for the Arts, 2nd Floor, located at 100 Lafayette Street, Baton Rouge, LA.The session is taught by Matt Mathes, ASLA, PPI Author LARE study…[Read more]

I just took section A. I thought it was on the Legal and Administrative Aspects of Practice. Little did I know that I was going to be tested on concrete test and what trash to recycle on the job site…..as a matter of fact I don’t remember seeing one question on bidding or the process or contract…Thanks CLARB for making me study crap that has…[Read more]

We are seeking resumes for a 5-6 year experience Landscape Architect/ designer for our busy Buffalo, NY office. Info found at http://www.JKLAstudio.com

Oohh yes, remember the 7200 PowerMac I had sitting in the LA studio? Maybe not. But, I donated it in 2005 while living in Las Vegas. It finally became to slow for internet use and I maxed out on RAM and hard drive storage for it. Those were some great times, in school, huh? Work on projects with no budgets and endless time spent on it. Too bad it…[Read more]

Hey Dave. One way would be to map appropriate landform/vegetation/sky images to a curved background similar to these at SCF. You could also do a search for sky dome at SCF or in the 3D Warehouse. If you intend to fly right up to the edge of the TIN, you might also need to extend the surface out a ways to meet at the image. By matching the…[Read more]

I am working on an animated fly-through of an airport. I have a tin of the actual terrain and have added my 3D model of the airport to the tin. My question for the group is, what do I do to eliminate “the earth is flat” look of my animation. My terrain tin extends in a two mile radius from the airport. I thought about putting a sky/horizon image…[Read more]

Oh, Robert, still the Mac Man! What happened to San Diego?

How are you all fairing? Running on my 3rd week of unemployment today. hoping to go back in the next month, but who knows?

Aloha! Unfortunately, I haven’t been back to Moscow since leaving in December 1998. I heard about all the changes on campus via my weekly Vandal email report. I lived in the LA studio, library and Art department’s McIntosh computer lab. Those PowerMacs were awesome!

Oldster alert….85 grad here.

You could also try the Shapebender script by Chris Fullmer. It can be a little complicated to figure out at first, but once you understand what it’s doing, it becomes pretty easy to manipulate. Chris has produced several videos (also posted at the above link) that help explain. If you have questions after watching those I’ll do my best to help.

Thanks Guys 🙂
@ John,  its an iron fence from 3D warehouse, so not too many segments to it.
@ Daniel, hi ya!   Yes, I did some what follow the book and downloaded the Path copy, but it did not work at all after several tries…..hmmm maybe I did not do it right cause it clump them together, but not on the arc.  I will email you.
 
thanks guys! 

Fences can be a material (an image applied to a curved surface in your case) or a component which would have segments.  I am not sure which is best for your project.  You may consider extruding your curved shape as a volume, then deleting everything but the wall in order to place the fence material on a curved surface.  The fencing materials ar…[Read more]

Hi,  I am trying to figure out how to apply a fence along an arc path, but cannot for the life of me find anything on it. I tried googling it and looked in the site design book, but nothing. the rotating tool does not work great for an arc line, I don’t think.  Its like I have to bend the fence to fit it along the arc, but do not know how…..help!
thanks

That’s great. Thank you! I’ve got your book, but I couldn’t find that one in there, shame on me if it was there..too tired! Thanks again.

Yes that was it!!! it works. Too bad there is no list of all these shortcuts, that would help a LOT. Thank you so much.

Not a bad question to ask at all.  The easiest way is to select an item with the black arrow key [or hit spacebar]. Then click the Move tool which has arrows in all directions and can be found in the Large Tool Set or the Getting Started Toolbar [or hit M on the keyboard].  After the item is highlighted and you have the Move tool selected, hol…[Read more]

Hi. I know it might sound stupid, but I still couldn’t figure out how you drag a copy in SketchUp. I can’t find any Move/Copy tool. 🙁 Hope someone can help.
Thanks.

i m start working on my thesis, my topic is about Japanese Zen garden on its therapeutic function. is there anyone familiar with Zen garden or any relate area?

Thanks for the help.