-
STEPHANIE Landregan FASLA LEED posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 4 months ago
We will be having our Workshop in LA on July 31. I’ll post more information shortly.
-
Melissa McDonald posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 4 months ago
I’m looking for a class to take for Section D…anyone have any suggestions?
-
Craig T posted an update in the group SketchUp 13 years, 4 months ago
Does anyone have an opinion about the value of Dynascape for SketchUp – the plant library in particular?
-
Matthew Durkovich posted an update in the group DESIGN 13 years, 5 months ago
Denis – try “From Concept to Form in Landscape Design” by Grant Reid. It’s a good starting point for what you’re talking about.
-
Denis Vasiliev posted an update in the group DESIGN 13 years, 5 months ago
Hello! I am looking for manuals on Design itself – especially combining forms and shapes(geometry), getting beatiful lines, proportions and finally getting harmonious composition. Any good books or e-books? The best free available on-line:) Waiting for advices!
-
Hossam Fathy Ahmed posted an update in the group Middle East Landscape 13 years, 6 months ago
hi LA iam dr hossaam fathy landscape architect and urban planner , from egypt, i have a small firm is HAA – UNITS http://www.haaunits.com. plz give me your feedbak on it and hope doing good LA co-opration with all of u
-
Cendra Ramirez posted an update in the group SketchUp 13 years, 6 months ago
Hey Daniel – I have a quick (hopefully) question. I tried to create a shade structure, but I can’t seem to figure out how to control the direction the fabric is taking. On the attached SU file, I would like the fabric to have a downward curve (showing the gravity) and instead I have an upward curve. Is there a quick way of changing the curve……[Read more]
-
Ray Freeman posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 6 months ago
Section E LARE Review in North Carolina
Date/Time: May 13-15, 2011 (25 hours)
Description:
Through lecture, group discussion, and practice exercises, this intensive three day course focuses on preparing students to take Section E: Grading & Drainage of the Landscape Architects Registration Examination. The course includes a look at how the p…[Read more] -
Matt Mathes PLA posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 7 months ago
Date change to Saturday May 7, 2011 for LARE Review Study Session – Section C & E in Baton Rouge, LA.
See post below on April 1 for all other information (time, place, fee, contact, etc.) -
Matt Mathes PLA posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 7 months ago
LARE Review Study Session- Section C & EThe Louisiana Chapter ASLA is hosting review sessions for the upcoming LARE exam for sections C&E on Saturday, April 9 from 8:30 am to 3:45 pm at the Shaw Center for the Arts, 2nd Floor, located at 100 Lafayette Street, Baton Rouge, LA.The session is taught by Matt Mathes, ASLA, PPI Author LARE study…[Read more]
-
Jose posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 7 months ago
I just took section A. I thought it was on the Legal and Administrative Aspects of Practice. Little did I know that I was going to be tested on concrete test and what trash to recycle on the job site…..as a matter of fact I don’t remember seeing one question on bidding or the process or contract…Thanks CLARB for making me study crap that has…[Read more]
-
Joy Kuebler posted an update in the group The Sustainable Sites Initiative 13 years, 8 months ago
We are seeking resumes for a 5-6 year experience Landscape Architect/ designer for our busy Buffalo, NY office. Info found at http://www.JKLAstudio.com
-
Wyatt Thompson, PLA posted an update in the group SketchUp 13 years, 8 months ago
Hey Dave. One way would be to map appropriate landform/vegetation/sky images to a curved background similar to these at SCF. You could also do a search for sky dome at SCF or in the 3D Warehouse. If you intend to fly right up to the edge of the TIN, you might also need to extend the surface out a ways to meet at the image. By matching the…[Read more]
-
Dave Breiter posted an update in the group SketchUp 13 years, 8 months ago
I am working on an animated fly-through of an airport. I have a tin of the actual terrain and have added my 3D model of the airport to the tin. My question for the group is, what do I do to eliminate “the earth is flat” look of my animation. My terrain tin extends in a two mile radius from the airport. I thought about putting a sky/horizon image…[Read more]
-
Jane A posted an update in the group Middle East Landscape 13 years, 8 months ago
lol my profile page has just been blocked by the censor!!!
anyone else had this problem in the UAE?
hilarious 🙂 -
Wyatt Thompson, PLA posted an update in the group SketchUp 13 years, 8 months ago
You could also try the Shapebender script by Chris Fullmer. It can be a little complicated to figure out at first, but once you understand what it’s doing, it becomes pretty easy to manipulate. Chris has produced several videos (also posted at the above link) that help explain. If you have questions after watching those I’ll do my best to help.
-
Debbie James posted an update in the group SketchUp 13 years, 8 months ago
Thanks Guys 🙂
@ John, its an iron fence from 3D warehouse, so not too many segments to it.
@ Daniel, hi ya! Yes, I did some what follow the book and downloaded the Path copy, but it did not work at all after several tries…..hmmm maybe I did not do it right cause it clump them together, but not on the arc. I will email you.
thanks guys! -
John Pacyga posted an update in the group SketchUp 13 years, 8 months ago
Fences can be a material (an image applied to a curved surface in your case) or a component which would have segments. I am not sure which is best for your project. You may consider extruding your curved shape as a volume, then deleting everything but the wall in order to place the fence material on a curved surface. The fencing materials ar…[Read more]
-
Debbie James posted an update in the group SketchUp 13 years, 8 months ago
Hi, I am trying to figure out how to apply a fence along an arc path, but cannot for the life of me find anything on it. I tried googling it and looked in the site design book, but nothing. the rotating tool does not work great for an arc line, I don’t think. Its like I have to bend the fence to fit it along the arc, but do not know how…..help!
thanks -
Pascu Andreea posted an update in the group SketchUp 13 years, 9 months ago
That’s great. Thank you! I’ve got your book, but I couldn’t find that one in there, shame on me if it was there..too tired! Thanks again.
- Load More