Pete Simpson

I am pulling together a maintenance manual for a design studio that wants to install storm water mitigation in its projects. After reading widely, I have noticed that most information has the same maintenance guidelines. I find it difficult to believe that if sedimentation must be cleaned out 4-5 times a year from an in-street planter in Portland,…[Read more]

To all:
check out my new discussion group: townscapes, villagescapes

Re Justin and Glass Factory Brownfield conditions.
Is there contamination of anything other than “broken glass” and in what condition would that contaminate be? .. Glass is just another form of sand, I wonder if you could tumble the contaminated ground in something like what they tumble new bricks to make them look old. Smooth off the edges, maybe…[Read more]

In regards to mitigation measures for the redevelopment of brownfield sites, the two design options that I am most familiar with, is to install a 40mil impervious linear and or install 3′ of clean fill.
The basic concept is that you are capping the areas of contaminated soils with a liner or with soil.

In regards to the impervious liner,…[Read more]

Will definitely browse a number of sites and see what they have. . thanks laura

Thanks laura….Am keeping my options open..so i would be interested in programs in US, maybe you could give details about there websites then i could check them out.

I have an interest in water management..and arid land reclamation. I have B.LA. and i want to pursue master sometime soon, wondering which is the best programme for me. Please share ur thoughts.

Thanks.

I graduated in May 2008 with my BLA and emphasis in Natural Resource Management. I am considering getting my master’s in Natural Resource Management.
Does anyone have any thoughts on how an MNRM degree would help or not really effect my job hunt?
Thanks!

I am looking for some of your best exemples of rain garden project, rain managment etc. I am in a preparation of a seminar and will enjoy to see what is really happening outside my own practice. Please feel free to share informations and projects….

Does anyone know of a good source for construction details for ‘green’ design? I’d like to review these…

iT IS MOSTLY CULLET DISPOSAL AND HEAVY METALS (LEAD), MOST OTHER CONTAMINENTS WHERE FULLY REMOVED. I WAS ACTUALLY INTERESTED IN BIO – PHYRO REMEDIATIONS BUT HAD NOT FOUND A GREAT DEAL OF INFO ON THEM.

Ya i defentenly plan on trying to use Bioretention techniques, but this is not a exectly a mitigation techniques it is a stormwater solution, i need some way to extract or mitigate the heavy metals that are with in the soil and water on site, bioretention will help in preventing them to go to the stream but then they are still on site in the soil.

Bioretention is a technique that can be used in nearly any environment, including brownfields, as a water quality control. This may be getting too technical for your project, but depending on the amount of on-site contamination, I would recommend that you wrap all of your stormwater BMPs with an impermeable membrane to help control the spread of…[Read more]

i am a landscape architecture student working on my senior project, which is a brownfield site ( old glass manufacture), and curious to see if any one had unique design, mitigation techniques and or a case study i should look in to.

I am currently working on my senior cap stone B.S. – LA project , which is a brownfield site ( old glass manufacture). I was curious to see if any one had any unique mitigation techniques or could refer me to a few good case studies.

Larry these look to be very helpful examples of how other municipalities are implementing these strategies. Good case studies. Thanks for sharing.

you might want to check out this useful doc put out by the epa. its a lot of portland stuff but much more.. Larry Shaeffer
and add to greenstreets links list

link to Municipal Handbook Green Infrastructure
http://cfpub2.epa.gov/npdes/greeninfrastructure/munichandbook.cfm

Green Infrastructure Municipal Handbook

The Municipal Handbook is a series…[Read more]

Well I’ll be honest, I’m very jealous of what you are able to get approved out on the west coast. As of now we seem to be a bit behind the curve but we’re trying to at least catch up with you.

The majority of our office work is around the Washington D.C. metropolitan area (including northern VA and Maryland) and each municipality seems to be at…[Read more]

Well in Australia they use a broader term Water Sensitive Urban Design, as opposed to LID, which refers to 3 areas of water management (Potable Water, Waste Water and Stormwater) and how my effecting one of these you have the potential to effect the others. For instance, by reusing stormwater to irrigate landscape or flush toilets, we also reduce…[Read more]

Philip – that sounds really awesome! I’m looking forward to hearing what was shared, not only from a green streets perspective but would love to hear all about what you are doing in Australia with regards to water design.