Groups – Activity – S Osaka

MV posted an update in the group SketchUp 13 years, 1 month ago

excelent¡¡ just i need it

Dinorah M. Melendez posted an update in the group SketchUp 13 years, 2 months ago

@Chris. The guide from mr. Haskin is terrific. Thanks a lot for sharing this, very useful. I was wondering how to get this effect for quite a long time, since I am autodidactic. Appreciate it.

Alba Villacampa Sanz posted an update in the group SketchUp 13 years, 2 months ago

Hi Daniel!
I became a promember of Land8 and I´m seeing some of Daniel Tal´s webinars on Sketchup. They are really easy to follow and very useful. There are also some photoshop webinar recordings but I haven´t been able to see those yet.
Hope this helps!

Daniel Edwards posted an update in the group SketchUp 13 years, 2 months ago

Hey There,
I have spent the last 3 years in a technical project management position and have become a bit rusty in the are of computer graphics using Sketchup and Photoshop in combination with each other. Obviously, this is such an integral part of practicing our profession these days so I want to get better at this.

I live in the Portland, O…[Read more]

Denis Vasiliev posted an update in the group SketchUp 13 years, 2 months ago

Quite useful!

Hilary Ann Noonan posted an update in the group SketchUp 13 years, 2 months ago

I had problems the whole time I was in school with my desktop crashing because my video card didn’t have enough umph. What solved the problem was more memory in the video card itself. You can also check the auto-cad sight to make sure any card you are thinking of getting is ok with auto-cad. The laptop I bought when I graduated is a 64-bit with a…[Read more]

Cendra Ramirez posted an update in the group SketchUp 13 years, 2 months ago

Awesome… thanks for the tips… that’s exactly what I was looking for.
THANKS!

Frank Varro posted an update in the group SketchUp 13 years, 2 months ago

I can attest to newer Geforce cards. I have a 470 from last year, and it runs like a champ. MIGHT end up going to a dual card setup, but that’s caused more by “Battlefield 3” than work…

Cendra Ramirez posted an update in the group SketchUp 13 years, 2 months ago

Can anyone recommend me a video card to be able to work on Sketch up, photoshop, illustrator and CAD? I am getting a new computer and wanted to see the minimum requirements I should have to support all those software.

Thank you

Cheryl Corson posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 2 months ago

Great. Glad to know that. Thanks, Mary Anne.
CLARB: If you’re listening in, consider adding some descriptive content to the LARE Orientation Guide about the interface if you are no longer able to provide a demo.

Cheryl Corson posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 2 months ago

I’ve got a question about the computer interface for multiple choice sections. CLARB no longer has a sample on its web site and the $30, 30 minute test drive session at Prometrix isn’t convenient. Can you only go back to questions you have not answered, or can you review all your answers and make changes at any time?

Veronica Meadows posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 3 months ago

Scores for the June 2011 Graphic administration have been posted on the CLARB website. Please contact Rebecca Moden at modenr@clarb.org if you need assistance accessing or viewing your scores.

MV posted an update in the group SketchUp 13 years, 3 months ago

Hy everybody¡¡ what about the shaderlight ?

Matt Mathes PLA posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 4 months ago

LARE Review Sections A-B-D – August 20 – Baton Rouge

The Louisiana Chapter ASLA is hosting review sessions for the upcoming LARE exam for sections A, B & D on Saturday, August 20th from 9:00 am to 3:00 pm in Baton Rouge (location to be announced). The all three sessions are taught by Matt Mathes, ASLA (PPI author of study guides used in 49…[Read more]

HUSSEIN KIWAN posted an update in the group SketchUp 13 years, 4 months ago

Dear Zach,,,,Thank you very much for such valuable information,,,one more question ,,,Is there are many differences between the free version and payable one ?,,,,best regards,,,,kiwan

Zach Watson posted an update in the group SketchUp 13 years, 4 months ago

In regards to the first comment about the program operating very slow, I would guess that either there are so many objects in the file that it is making the program run slow, or hardware on your computer such as your CPU and/or your Memory are not fast enough for the program. In regards to the CAD to Sketchup, Google removed that option in the…[Read more]

HUSSEIN KIWAN posted an update in the group SketchUp 13 years, 4 months ago

Dears,,,,I am facing problem in sketch up 8,,,in moving cursor ,,,,and very slow,,,to rotate or flipping the models ,,is this problem cause i am using free version ,,,and i can not to import the CAD,s FILES ,,,,,PLZ ADVICE ,,,

Matt Mathes PLA posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 4 months ago

LARE Review Study Session – August 27 – Nashville
The Tennessee Chapter ASLA is hosting review sessions for the upcoming LARE exam for sections A, B & D on Saturday, August 27th from 9:00 am to 3:00 pm in Nashville (location to be announced).
The interactive session is taught by Matt Mathes, ASLA and Erik Sweet, RLA.
Both are PPI authors of LARE…[Read more]

Ray Freeman posted an update in the group L.A.R.E. – ANYTHING GOES 13 years, 5 months ago

LARE Preparation Course in Northern California

Date/Time: July 22-24, 2011

Description: Sections A, B & D 8:30 am-6:00 pm, July 22-24, 2011.

Course Description: This class is a highly detailed review of the multiple choice sections of the LARE. The course includes an overview of the LARE from the point of view of the…[Read more]