Groups – Activity – Steve Mercer

Dinorah M. Melendez posted an update in the group SketchUp 13 years, 2 months ago

@Chris. The guide from mr. Haskin is terrific. Thanks a lot for sharing this, very useful. I was wondering how to get this effect for quite a long time, since I am autodidactic. Appreciate it.

Alba Villacampa Sanz posted an update in the group SketchUp 13 years, 2 months ago

Hi Daniel!
I became a promember of Land8 and I´m seeing some of Daniel Tal´s webinars on Sketchup. They are really easy to follow and very useful. There are also some photoshop webinar recordings but I haven´t been able to see those yet.
Hope this helps!

Daniel Edwards posted an update in the group SketchUp 13 years, 2 months ago

Hey There,
I have spent the last 3 years in a technical project management position and have become a bit rusty in the are of computer graphics using Sketchup and Photoshop in combination with each other. Obviously, this is such an integral part of practicing our profession these days so I want to get better at this.

I live in the Portland, O…[Read more]

Denis Vasiliev posted an update in the group SketchUp 13 years, 2 months ago

Quite useful!

Mike Lin posted an update in the group BeLoose Graphic Workshop 13 years, 2 months ago

Kirk, welcome and I will continue to add more tips of graphics. Please ask your friends to join the group and also sign up at http://www.beloose.com for more.

Hilary Ann Noonan posted an update in the group SketchUp 13 years, 2 months ago

I had problems the whole time I was in school with my desktop crashing because my video card didn’t have enough umph. What solved the problem was more memory in the video card itself. You can also check the auto-cad sight to make sure any card you are thinking of getting is ok with auto-cad. The laptop I bought when I graduated is a 64-bit with a…[Read more]

Cendra Ramirez posted an update in the group SketchUp 13 years, 2 months ago

Awesome… thanks for the tips… that’s exactly what I was looking for.
THANKS!

Frank Varro posted an update in the group SketchUp 13 years, 2 months ago

I can attest to newer Geforce cards. I have a 470 from last year, and it runs like a champ. MIGHT end up going to a dual card setup, but that’s caused more by “Battlefield 3” than work…

Cendra Ramirez posted an update in the group SketchUp 13 years, 2 months ago

Can anyone recommend me a video card to be able to work on Sketch up, photoshop, illustrator and CAD? I am getting a new computer and wanted to see the minimum requirements I should have to support all those software.

Thank you

Kirk Hiatt posted an update in the group BeLoose Graphic Workshop 13 years, 2 months ago

Thanks for the invite Mike! I’m excited about this group.

Dave Maciulis posted an update in the group Residential Design Group 13 years, 2 months ago

Hey everyone, I recently launched a landscape Design Build Magazine this Spring.It focuses more on the consumer rather than the landscape architecture/ landscape designer profession. If any of you are interested at all to see what it’s all about you can visit http://www.naturallandscapemagazine.com click the magazine and you can look through the…[Read more]

Mike Lin posted an update in the group BeLoose Graphic Workshop 13 years, 2 months ago

Create your own book of Illustrations on computer
Do you realize that there are over 2500 sketches, renderings, illustrations, design photos and nice pictures on our BeLoose web site under “Photos”, many beautiful drawings are done by very talented illustrators from around the world.
You are encouraged to spend a few hours and go to the www,beloose…[Read more]

Mike Lin posted an update in the group BeLoose Graphic Workshop 13 years, 3 months ago

Render Landscape Plan
How you can render a landscape plan with the following easy steps:

Outline your plan with pen (LePen used). Use tips: straight edge, circle template, overlap corner, professional dot, gap.
Outline two trees with heavier Sharpie pen next to thinner pen as they are closer to your eyes.
For more details, click here.

Mike Lin posted an update in the group BeLoose Graphic Workshop 13 years, 3 months ago

Six approaches to layout a successful space
After we have completed the bubble diagram, site analysis and preliminary design, often we are stuck in determine how to lay out appropriate lines to a successful space. By laying your design on one of the six grids and follows each approach’s rule, a satisfying result can easily be obtained. 6 e…[Read more]

Leo Gonzales posted an update in the group BeLoose Graphic Workshop 13 years, 3 months ago

Thanks for the invite, Mike. This is great!

Mike Lin posted an update in the group BeLoose Graphic Workshop 13 years, 3 months ago

Quick thumbnail sketch #1
It is only 3″x4″ in size and colored with markers and colored pencil using all six colors (red, orange, yellow, green, blue and purple). Outlined with Prismacolor black pencil. Took only 5 minutes, it is a great way to communicate your great ideas quickly with your clients. Remember, the best designers who don’t need t…[Read more]

heidi diskin posted an update in the group Residential Design Group 13 years, 3 months ago

Hello, does anyone in the philadelphia, new York or Delaware area have dynascape design program on their computer. Thanks for your response

MV posted an update in the group SketchUp 13 years, 3 months ago

Hy everybody¡¡ what about the shaderlight ?

HUSSEIN KIWAN posted an update in the group SketchUp 13 years, 4 months ago

Dear Zach,,,,Thank you very much for such valuable information,,,one more question ,,,Is there are many differences between the free version and payable one ?,,,,best regards,,,,kiwan

Zach Watson posted an update in the group SketchUp 13 years, 4 months ago

In regards to the first comment about the program operating very slow, I would guess that either there are so many objects in the file that it is making the program run slow, or hardware on your computer such as your CPU and/or your Memory are not fast enough for the program. In regards to the CAD to Sketchup, Google removed that option in the…[Read more]