Groups – Activity – Maria Torres

Ray Freeman posted an update in the group LARE Multiple Choice Discussion 12 years, 9 months ago

LARE Preparation Course in Northern California

Class Dates: Sections 1&2_March 9-10, 2013 Sat-Sun 8:30 am-6:15 pm

We will have a maximum of 28 students per class to allow for good student interaction with the instructor. Ray Freeman has 12 years of experience in teaching LARE reviews and has helped over 1700 students prepare for the…[Read more]

Morteza Adib posted an update in the group SketchUp 13 years, 3 months ago

sketchup+arlantis

Ray Freeman posted an update in the group LARE Multiple Choice Discussion 13 years, 4 months ago

There are still seats available in the Freeman & Jewell Section 1 and 2 review on August 11-12. E-mail me at Rayfreeman3@comcast.net for a current brochure.
Ray Freeman NC lic. 356, MA lic. 423, and CA lic. 3722 has been teaching LARE reviews multiple times each year since 2000. He has helped hundreds of candidates to pass the LARE.

JIm Leggitt posted an update in the group Drawing Shortcuts 13 years, 7 months ago

Nice drawing! I would like to know if your sketch was made over a 3D SketchUp model.

MV posted an update in the group SketchUp 14 years, 2 months ago

excelent¡¡ just i need it

Dinorah M. Melendez posted an update in the group SketchUp 14 years, 2 months ago

@Chris. The guide from mr. Haskin is terrific. Thanks a lot for sharing this, very useful. I was wondering how to get this effect for quite a long time, since I am autodidactic. Appreciate it.

Alba Villacampa Sanz posted an update in the group SketchUp 14 years, 2 months ago

Hi Daniel!
I became a promember of Land8 and I´m seeing some of Daniel Tal´s webinars on Sketchup. They are really easy to follow and very useful. There are also some photoshop webinar recordings but I haven´t been able to see those yet.
Hope this helps!

Daniel Edwards posted an update in the group SketchUp 14 years, 2 months ago

Hey There,
I have spent the last 3 years in a technical project management position and have become a bit rusty in the are of computer graphics using Sketchup and Photoshop in combination with each other. Obviously, this is such an integral part of practicing our profession these days so I want to get better at this.

I live in the Portland, O…[Read more]

Denis Vasiliev posted an update in the group SketchUp 14 years, 2 months ago

Quite useful!

Hilary Ann Noonan posted an update in the group SketchUp 14 years, 2 months ago

I had problems the whole time I was in school with my desktop crashing because my video card didn’t have enough umph. What solved the problem was more memory in the video card itself. You can also check the auto-cad sight to make sure any card you are thinking of getting is ok with auto-cad. The laptop I bought when I graduated is a 64-bit with a…[Read more]

Cendra Ramirez posted an update in the group SketchUp 14 years, 2 months ago

Awesome… thanks for the tips… that’s exactly what I was looking for.
THANKS!

Frank Varro posted an update in the group SketchUp 14 years, 2 months ago

I can attest to newer Geforce cards. I have a 470 from last year, and it runs like a champ. MIGHT end up going to a dual card setup, but that’s caused more by “Battlefield 3” than work…

Cendra Ramirez posted an update in the group SketchUp 14 years, 2 months ago

Can anyone recommend me a video card to be able to work on Sketch up, photoshop, illustrator and CAD? I am getting a new computer and wanted to see the minimum requirements I should have to support all those software.

Thank you

MV posted an update in the group SketchUp 14 years, 4 months ago

Hy everybody¡¡ what about the shaderlight ?

HUSSEIN KIWAN posted an update in the group SketchUp 14 years, 4 months ago

Dear Zach,,,,Thank you very much for such valuable information,,,one more question ,,,Is there are many differences between the free version and payable one ?,,,,best regards,,,,kiwan

Zach Watson posted an update in the group SketchUp 14 years, 4 months ago

In regards to the first comment about the program operating very slow, I would guess that either there are so many objects in the file that it is making the program run slow, or hardware on your computer such as your CPU and/or your Memory are not fast enough for the program. In regards to the CAD to Sketchup, Google removed that option in the…[Read more]

HUSSEIN KIWAN posted an update in the group SketchUp 14 years, 4 months ago

Dears,,,,I am facing problem in sketch up 8,,,in moving cursor ,,,,and very slow,,,to rotate or flipping the models ,,is this problem cause i am using free version ,,,and i can not to import the CAD,s FILES ,,,,,PLZ ADVICE ,,,

Steven Bauer posted an update in the group SketchUp 14 years, 5 months ago

Daniel,
I like the Dynascape SketchUP. Is the Dynascape easy to work with using their SketchUP landscape SketchUP plant materials?

Frank Varro posted an update in the group SketchUp 14 years, 5 months ago

Looking good as always Daniel! My only complaint is the people, in that I hate them, in that I don’t have them. I’ll send you some of my newer stuff today to see what you think.