Maria Torres

What rendering tool did you use for that model?

Does anyone have an opinion about the value of Dynascape for SketchUp – the plant library in particular?

Can anyone point  out a good source for sustainability and materials and methods. It felt great on the exam, but something has to be missing. Im floating between 2s and 3s and I have referenced many books that I have. Do the practice exams help?

Thanks, Veenu!

Alland, 
 
Something I can think of right now are, 
Pavement Cross sections, look for 
-thickness of concrete
-proper placement of filter fabric
-water proofing etc
 
Stairs
-Riser thread heights or riser tread combined dimensions
-Handrail height, end handrail wrap up
 
Gaurdrails- spacing between rails, height, minimum requirement of gaurd…[Read more]

any idea what may be some of the flaws in the construction cross sections?
steps, hardscaping, retaining walls, etc?

Great, thanks for the help!
 
I think I’m going to buy the LaGro book to start with and try to get the other ones through interlibrary loan (which never even occurred to me at first). 
 
I would eventually like to buy all of them, but that’s almost $600 for all the books (used), exam fee, and study guides, so that’ll have to wait. 

The test had questions from all four books.  I think the Site Analysis by LaGro would be the most important followed by the Booth and Russ books.  I suggest you read them all though if you are serious about passing the exam.  They are great books to have in your library for referencing throughout your career so make the investment if you can. Als…[Read more]

Jessica, you should be able to get all these books at your local library through interlibrary loan.

Jessica,
 
I have Site Analysis, and Site Planning & Design Handbook.  I read both of them, but only skimmed the Site Planning book.  Definitely read Site Analysis and get the PPI study material, and maybe the CLARB practice test.  That is what got me to pass this time.
 

Hey Daniel – I have a quick (hopefully) question. I tried to create a shade structure, but I can’t seem to figure out how to control the direction the fabric is taking. On the attached SU file, I would like the fabric to have a downward curve (showing the gravity) and instead I have an upward curve. Is there a quick way of changing the curve……[Read more]

Thanks Tim and Cynthia. Next webinar will really get into strategic thinking about perspectives and drawing composition – my favorites! I’ll cook up some more video clips and hopefully control the camera focus a bit more than in last night’s program.

Webinar was really great – nice mix of refresher and new info. So helpful to keep up to date on materials and processes and see through Jim’s crystal ball into the future.

Great webinar last night, Jim!  Looking forward to part 2 next week!

Tad, I don’t know why Russ would write it as 1:4. That’s not the “conventional” way of doing it.

Ray and everyone,
 
I am taking B here shortly but I have a lingering question about the slope steepness ratio method.  Norman Booth is writing it horizontal first, verical second 4:1(Basic Elements of Landscape Architectural Design, page 31).  Thomas Russ is writing it in reverse 1:4 (Site Planning and Design, Page 125) Is there a reason why the…[Read more]

http://www.flashcardmachine.com/lare-section-a.html
Is a great LARE Section A Flashcard set to look at.
 

Hey Dave. One way would be to map appropriate landform/vegetation/sky images to a curved background similar to these at SCF. You could also do a search for sky dome at SCF or in the 3D Warehouse. If you intend to fly right up to the edge of the TIN, you might also need to extend the surface out a ways to meet at the image. By matching the…[Read more]

I am working on an animated fly-through of an airport. I have a tin of the actual terrain and have added my 3D model of the airport to the tin. My question for the group is, what do I do to eliminate “the earth is flat” look of my animation. My terrain tin extends in a two mile radius from the airport. I thought about putting a sky/horizon image…[Read more]

You could also try the Shapebender script by Chris Fullmer. It can be a little complicated to figure out at first, but once you understand what it’s doing, it becomes pretty easy to manipulate. Chris has produced several videos (also posted at the above link) that help explain. If you have questions after watching those I’ll do my best to help.